Dahan mechanical slap standards vibrating sieve machine structure is divided into two kinds, one is gear-type slap screen, the other is a belt-type slap screen, the operating parameters are in line with national standards, with test sieve, sieve-like use, can of powder materials in metallurgy, chemical industry, abrasives, superhard materials, feed, food, pharmaceutical and other industries for screening production, testing, following works by Han machinery for belt-type vibration sieve machine slap standards and precautions introduced to everyone.
Slap standards vibrating sieve machine work principle:
Motor driven by the timing belt drive gear onto the spindle rotation speed of the required gear shift spindle after spindle drive eccentric reciprocating make skateboarding, driving test sieves mounted on slide tray around shaking, while the spindle drive gear mandrel rotates the cam gear after gear hit the top plunger mandrel, the mandrel so that the hammer down slap shot test sieve cover, making the test sieve, sieve-like material in the back and forth and up and down vibration, making less than the test surface mesh sieve the material falling into the lower teeth screening test sieve, so layers of screening, so that the material within each test sieve, leaving only the same particle size, to achieve separation of different particle size and particle size of the material to determine the composition.
Slap-style standard sieve shaker Caution:
1, slap-type standard vibration sieve machine motor rotation direction must be in direction of arrow (three-phase motors due to hit the top cam plunger, direction of the steering will be stuck, unable to rotate).
2, check the motor rotation direction: Before power lift mandrel, then boot, then check the electric rotating direction, such as wrong can try again in a three-phase two-phase exchange thread direction, determine the right direction after normal use. (Remember: You can not live adjustment)